| Working Area | ||
| Max. tourning dia. on the table | mm. | 400 |
| Tourning dia. | mm. | 280 |
| Max. tourning lenght | mm. | 350 |
| Standard Hydraulic chuck diam. | mm. | 169 |
| Travels | ||
| X axis travel | mm. | 160 |
| Z axis travel | mm | 350 |
| Spindle | ||
| Spindle nose | ASA A2-5 | |
| Max. spindle tourning speed | RPM | 6.000 |
| Spindle motor power | Kw | 11 |
| Spindle hole Dia. | mm. | 51 |
| Crossrail dia. | mm. | 43 |
| Frontalbearing dia. (inside spindle) | mm. | 90 |
| Turret | ||
| Station | n. | 10 |
| Tool section O.D. | mm | 20x20 |
| Feed | ||
| Rapid Feed | ||
| X axis | m/min | 20 |
| Z axis | m/min | 20 |
| Axis Motor | ||
| Feed Motor | ||
| X axis | Kw. | 1.0 |
| Z axis | Kw. | 1.0 |
| Tailstock | ||
| Taper Attack | MT | 3 |
| Nose Diametre | mm. | 65 |
| Feed | mm. | 80 |
| Other Characteristics | ||
| Electric Power | KVA | 20 |
| Coolant liquid tank capacity | Lt | 205 |