| Working Area | ||
| Max tourning dia. on the table | mm. | 620 |
| Max. tourning dia. on the slide | mm. | 400 |
| Tourning dia. | mm. | 370 |
| Max. tourning lenght | mm. | 610 |
| Hydraulic chuck standard dia. | mm. | 210 |
| Travels | ||
| X axis travel | mm. | 225 |
| Z axis travel | mm. 620 | |
| Spindle | ||
| Spindle Nose | ASA | A2-6 |
| Max. Spindle tourning speed | RPM | 5000 |
| Spindle motor power | KW | 15 |
| Spindle hole Dia | mm. | 62 |
| Crossrail Dia. | mm. | 51 |
| Frontal bearing dia.( inside spindle) | mm. | 110 |
| Turret | ||
| Servomotor | ||
| Stations | n. | 12 |
| Live Station | n. | 12 |
| Nose | VDI | 40 |
| Tool section O.D. | mm | 25 |
| Tool Dia. I.D. bore | mm | Ø 40 |
| Indexing time (1 station) | s. | 0.5 |
| Max power to tools | KW | 4.5 |
| Max. transmission to couple | Nm | 50 |
| Max RPM exit turret | RPM | 4000 |
| Resolution C axis | mm | 0.001 |
| Feed | ||
| Rapid Feed: | ||
| axis X | m/min | 20 |
| axis Z | m/min | 24 |
| Axis Motor | ||
| Feed motor: | ||
| axis X | KW | 2.8 |
| axis Z | KW | 2.8 |
| Tailstock | ||
| Taper Attack | MT | 4 |
| Nose diametre | mm. | 85 |
| Feed | mm. | 80 |
| Other Characteristics | ||
| Electric Power | KVA | 32 |
| Coolant liquind tank capacity | Lt. | 230 |