| Working Area | ||
| Max.tourning dia on the table | mm. | 620 |
| Max. tourning dia. on the slide | mm. | 400 |
| Tourning Dia. | mm. | 390 |
| Max tourning lenght | mm. | 610 |
| Standard Hydraulic chuck, dia | mm. | 204 |
| Travels | ||
| X axis travel | mm. | 225 |
| Z axis travel | mm. | 620 |
| Spindle | ||
| Spindle nose | A2-6 | |
| Hydraulic chuck Tounfou | mm. | 204 |
| Max. tourning spindle speed. | RPM | 5.000 |
| Spindle motor power | KW | 15 |
| Spindle hole Dia. | mm. | 61 |
| Crossrail dia. | mm. | 51 |
| Frontal bearing dia.( inside spindle) | mm. | 110 |
| Turret | ||
| Milled plateau | ||
| Stations | n. | 12 |
| O.D. tool section | mm | 25 |
| I.D. tool dia. bore | mm | Ø 40 |
| Indexing time (1 station) | s. | 0.15 |
| Feed | ||
| Rapid feed : X axis | m/min | 20 |
| Z axis | m/min | 24 |
| Motor Axis | ||
| Motor feedX axis | KW | 2.8 |
| Z axis | KW | 2.8 |
| Tailstock | ||
| Taper Attack | MT | 4 |
| Diametre | mm. | 85 |
| Feed | mm. | 80 |
| Other Characteristics | ||
| Electric Power | KVA | 3 |
| Coolant liquid tank capacity | Lt. | 165 |