| Working area | ||
| Max tourning dia. on the table | mm. | 620 |
| Max. tourning dia. on the slide | mm. | 400 |
| Tourning dia. | mm. | 370 |
| Max. tourning lenght | mm. | 480 |
| Hydraulic chuck standard dia. | mm. | 254 |
| Travels | ||
| X axis travel | mm. | 225 |
| Z axis travel | mm. | 620 |
| Spindle | ||
| Spindle nose | A2-6 | |
| Max. tourning spindle speed. | TPM | 4500 |
| Spindle Motor Power (30 min.) | KW | 15 |
| Spindle hole dia. | mm. | 81 |
| Crossrail dia. | mm. | 65 |
| Frontal bearing dia. (inside spindle) | mm. | 120 |
| Turret | ||
| Stations | n. | 12 |
| Tool section O.D. | mm | 25x25 |
| I.D. bore tool diametre | mm | 40 |
| Indexing time (1 station) | s. | 0.15 |
| Feeds | ||
| Rapid feeds: X axis | m/min | 20 |
| Z axis | m/min | 24 |
| Axis Motor | ||
| Feed Motors: | ||
| X axis | Kw. | 2.8 |
| Z axis | Kw. | 2.8 |
| Tailstock | ||
| Taper | MT | 4 |
| Diametre | mm. | 85 |
| Feed | mm. | 80 |
| Other Characteristics | ||
| Electric Power | KVA | 320 |
| Coolant liquid tank capacity | Lt. | 165 |