| Working Area | ||
| Max. tourning dia on the table | mm. | 680 |
| Max. tourning dia | mm. | 470 |
| Max. tourning length | mm | 550/1050/1500/2000 |
| Travels | ||
| X axis travel | mm. | 280 |
| Z axis travel | mm | 600/1100/1600/2100 |
| Spindle | ||
| Spindle nose | ASA | A2-8 |
| Hydraulic chuck dia | mm. | 305 |
| Max spindle tourning speed | RPM | 3500 |
| Rpmgear box (mechanic) | 100-600 / 600-3500 | |
| Max spindle motor power | KW | 26 |
| Spindle hole dia | mm. | 87 |
| Crossrail dia | mm. | 77 |
| Frontal internal bearing dia. (spindle side) | mm. | 130 |
| Turrett | ||
| Bidirectional | ||
| Plateau milling type | ||
| Stations | n. | 12 |
| Indexing time | s. | 0.9 |
| Tool sizeboard / bore | mm. | 25 - Ø 40 |
| Feeds | ||
| Rapid feed X axis | m/min | 20 |
| Z axis | m/min | 24 |
| Motors | ||
| X axis | KW | 4 |
| Z axis | KW | 4 |
| Tailstock | ||
| .Inside taper | MT | 5 |
| Diametre | mm. | 110 |
| Travel | mm. | 100 |
| Coolant liquid tank capacity | Lt. | 165 |
| Electric power | KVA | 44 |