Clicca sul bottone qui sotto per scaricare i documenti.
Il materiale dell'area download è riservato ai soli utenti iscritti.
General description
CNC vertical machining center
Movable upright structure
Linear roller guides
Speed of rapid movements 36/40/40 m minute
Forced and conditioned refrigeration of the 40 mm diameter screws of the three translation axes. This allows to eliminate the deformations and elongations of the screws due to their overheating and to maintain the
same positioning accuracy throughout daily work.
Electro-Spindle 120 mm in diameter with cooling oil conditioning system to avoid deformations due to the temperature changes to which the head is subjected during a processing cycle.
32-place chain tool magazine, Random, Bidirectional with exchange arm to minimize the dead time of the tool change phase.
Pass-through refrigeration through the spindle line (CTS) with an additional 6 bar dedicated pump with a double cartridge filter, one in suction and one in delivery. Spindle already prepared for pressures up to 70 Bar.
Chip conveyor inside the machine, conveyor belt on the front.
CNC Fanuc 31ìB5 full color monitor of Manual Guide ì.
General descriptionCNC vertical machining center 5 axis MV205 (Moving column, tiliting head)
Movable upright structure
Linear roller guides
Speed of rapid movements 36/40/40 m minute
Forced and conditioned refrigeration of the 40 mm diameter screws of the three translation axes. This allows to eliminate the deformations and elongations of the screws due to their overheating and to maintain thesame positioning accuracy throughout daily work.
Electro-Spindle 120 mm in diameter with cooling oil conditioning system to avoid deformations due to the temperature changes to which the head is subjected during a processing cycle.
32-place chain tool magazine, Random, Bidirectional with exchange arm to minimize the dead time of the tool change phase.
Pass-through refrigeration through the spindle line (CTS) with an additional 6 bar dedicated pump with a double cartridge filter, one in suction and one in delivery. Spindle already prepared for pressures up to 70 Bar.
Chip conveyor inside the machine, conveyor belt on the front.
CNC Fanuc 31ìB5 full color monitor of Manual Guide ì.
Standard equipment
· Refrigeration pump
· Lubrication unit
· Air blowing system at the spindle
· Leveling feet
· Toolbox
· Machine status signaling bars
· Work light (LED)
· Spindle refrigeration oil conditioner
· 12000 spindle spindle
· Rigid tapping
· Heat exchanger
· Refrigerated ball screw
· Internal chilling tool chuck with 6 bar cartridge filter
· Electronic flyer
· Rear-mounted screw conveyor
· Carpet chip conveyor with container
· M30 auto-off
· 15 "color LCD
· Full key panel
· Macro B
· Coordinated rotation
· Scaling
· 256 recordable programs
· 2G memory
· TCP tool center point (only with Fanuc 31iB5)
Optional accessories
Predisposition for fume extraction, hole only
Spindle 20,000 revolutions
Spindle 18,000 rpm HSK 63 A kw 34 Nm130
HSK63 spindle connection
Spindle 16,000 spins
Renishaw NC4 laser setter
Renishaw contact presetting OTS27R
TRS2 laser tool integrity
Pallet washing type "Niagara"
OMP40 electronic probe installed at CNS site
BT40 chain tool magazine with 40 seats
HSK 63 tool magazine with 40 seats
BT40 chain tool magazine 60 positions
HSK 63 chain tool magazine 60 positions
RMP 600 electronic probe with requalification software
of the machine kinematics plus calibrated sphere
Heidenhain TNC 640 control
CNC Fagor 8065
Optical axis X line
Y-axis optical lines
Z-axis optical lines
CTS 20 bar with paper filter + internal spindle air
CTS 20 bar with cartridge filter + internal spindle air
CTS 30 + ATS with cartridge filter
CTS 30 + ATS with paper filter (alternatively)
CTS 40 with paper filter
Package complies with industry 4.0 directives
Dredging conveyor (with dredging shovels)
instead of a roller shutter conveyor
Predisposition 4th axis composed exclusively
from cables and connectors
Continuous table installation 4th axis at Ns. seat
GXA255S rotary table
CX255S rotary table
GXA320 rotary table
Manual tailstock ST-255T
Hydraulic tailstock ST-255TH
Hydraulic tailstock ST-320TH
TECHNICAL SPECIFICATIONS MV-205 5 axis
Table
Table dimension 2200x750 mm
Table heigh 920 mm
Rotary table dimension diam. 650 mm
Working piece maximum dimension 2000x750x700
Distance spindle/table 20-770 mm
Distance table/spindle center 90° 255-1055 mm
Max swing diam. 750x720 mm
Max loading weight 2000 (600 sulla tavola girevole) kg
Travel
X axis 2000 mm
Y axis 700 mm
Z axis 750 mm
B axis (Tilting head) +-102°
C axis +-360°
Distance spindle center/colum 930 mm
Main spindle
Spindle taper BT-40
Max spindle speed 12000 rpm
Spindle trasmission Built-In motor
Spindle power (count/30 min) 24 kw
Spindle torque 118 Nm
Maximum torque 1863 rpm
Feed
X axis rapid X 40 m/min
Feed 1-20000 mm/min
Y axis rapid 40 m/min
Feed 1-20000 mm/min
Z axis rapid 40 m/min
Feed 1-20000 mm/min
B/C B=50/C=25 min-1
Ball screw diameter 45/40/40 P=25/20/20
A.T.C.
Tool attack BT-40
ATC type Chain type
Tools number 24
Tool selection Random
Max tool length 250 mm
Max tool weight 8 kg
Max tool diameter 75 mm
adjacent tools 125 mm
Total weight on ATC 160 kg
arm drive method CAM
MAG drive method AC motore
Dimensions
Length 5900 mm
Width 3010 mm
Height 2900mm
Weight 17000 kg
